FUXTEC BV140 Mode D'emploi page 37

5.1 TO START THE ENGINE
1. Before you start the engine, please turn the engine switch to "ON." (Fig.7A)
3. To start a cold engine, set the throttle stick to "On" (Fig. 7B). Move the throttle lever to the "Off" position.
(Fig.7B).
4. Stand behind the device, grasp the brake lever, and hold it against the lower handle.
(Fig.7C)
5. Hold the brake lever as shown in Fig.7C and quickly pull up the starter handle, as shown in Fig.7D. After
starting the engine, slowly return it to the cable guide pins.
6. Set the throttle lever to the "On" position. (Fig.7F)
NOTE! If the cutting unit comes into contact with the ground, the device may move jerkily.
Fig.7A Fig.7B Fig.7C
Fig.7D Fig.7E
Original User Manual FUXTEC FX-BV140_de_en_fr_ita_rev04
Carburetor lever
Throttle lever
Grasp the brake
lever.
13