Buffalo P106 Mode D'emploi page 7

Telephone Helpline: 0845 146 2887 (United Kingdom)
Operation
Seasoning the Griddle Plate (L513 Only)
Before using for the first time the cooking surface needs to seasoned.
Ensure the cooking surface is clean.
1.
Brush the surface with cooking oil.
2.
Set the thermostat to 110°C and turn the appliance On. The power indicator light turns on.
3.
Once the appliance reaches temperature the power indicator light turns off.
4.
Turn the appliance Off and allow the to cool before wiping away any excess oil.
5.
The appliance is now ready to use.
6.
Cooking
Note: The thermostat controls both the Griddle and the Toaster at the same time. They
do not operate independently of each other.
Connect the appliance to the mains power supply.
1.
Set the thermostat to the desired temperature (60°C-300°C). The power indicator light comes on and
2.
the appliance begins to heat up.
Note: 200°C to 220°C is sufficient for general cooking.
The power indicator light turns off when the appliance has reached the set temperature.
3.
Note: BUFFALO recommend the cooking surface is lightly oiled before cooking.
Place the foodstuffs on and/or in the appliance and cook as required.
4.
Model featured: L513
UK
Griddle plate
(L513 only)
Grill
Crumb Tray
Thermostat
Power
indicator light
Waste Tray
2