Makita UA001G Manuel D'instruction page 13

4. Align the hole on the sleeve with that on the pipe,
and then attach 2 sleeves to the pipe. Align the hole on
the sleeve with that on the attachment, and then insert
the pipe into the attachment.
1
4
Fig.17
► 1. Hole 2. Bolt 3. Sleeve 4. Pipe
5. Tighten 2 bolts to fix the attachment.
1
Fig.18
► 1. Bolt
6.
To fix the head of the tool vertically, fix the attachment
by tightening the bolt to the hole on the attachment
shown in the figure, and then tighten the other bolt.
2
1
3
Fig.19
► 1. Bolt 2. Hole
To fix the head of the tool horizontally, fix the attachment
by tightening the bolt to the hole on the attachment
shown in the figure, and then tighten the other bolt.
Fig.20
► 1. Bolt 2. Hole
13 ENGLISH
Attach the head of the tool to the attachment.
1
1
2
2