P
RECAUTIONS
Handling the Detachable Faceplate
DO NOT drop or cause shock to the faceplate as serious damage may occur. Protect the faceplate
by storing it in the supplied carrying case.
Avoid Mechanical Malfunction
DO NOT grab a disc while it is being automatically loaded into the source unit. Doing this may cause
serious damage to the playback mechanism and/or damage to the disc.
IR REMOTE CONTROLLER
Environment Exposure
DO NOT expose the IR Remote to any of the following: direct sun and heat, high humidity and rain
or water.
Handling the IR Remote
DO NOT drop or cause shock to the IR Remote as serious damage may occur.
COMPACT DISCS
Disc Handling and Care
DO NOT touch the playing side (opposite of label side) of the disc. When handling the disc, only the
outer edges or center hole of the disc should be touched. DO NOT affix any sticker or label to the
disc. DO NOT apply vinyl record spray, anti-static agent, acetone, or any other volatile chemicals to
the disc.
Damaged Disc
DO NOT play a cracked, warped, or damaged disc. Doing this may cause serious damage to the
playback mechanism.
New Discs
The CD player will eject discs that have either been inserted incorrectly or have irregular surfaces. If a
new disc is ejected after loading, feel around the outer edge of the CD and its center hole. Any small
burrs or irregularities could inhibit proper loading of the disc.To remove the burrs, rub the inside
edge of the hole and outside edge of the disc with an object such as a ball point pen.
C
C
ONTENTS OF
ARTON
Model 9220 Source unit
Installation & Operation Manual
Standard Mounting Sleeve
Back strap (taped to box insert)
Chassis Release Keys (2)
I
NSTALLATION
REMOTE
Battery Installation
1.
Remove the battery cover on the back of the remote.
2
Install two (2) AAA batteries with the polarities correct as show by the diagram inside the battery
compartment of the remote.
4
Hardware Package
16-pin Power Harness
Faceplate Cases (1 Soft and 1 Hard)
IR Remote Control (Small Box Inside Carton)