Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT SAFETY INFORMATION
Your Sound Bar is designed and manufactured to operate within defined design limits, and misuse may result in
electric shock or fire. To prevent your Sound Bar from being damaged, the following rules should be observed for its
installation, use, and maintenance. Please read the following safety instructions before operating your Sound Bar.
Keep these instructions in a safe place for future reference. Please heed all warnings and follow all instructions.
• To reduce the risk of electric shock or component damage, switch off the power before connecting other components to
your Sound Bar.
• When moving your Sound Bar from an area of low temperature to an area of high temperature, condensation may form in
the housing. Wait before turning on your Sound Bar to avoid causing fire, electric shock, or component damage.
• Never push any object into the slots and openings on your Sound Bar enclosure. Do not place any objects on the top of
your Sound Bar. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your Sound Bar.
• Your Sound Bar should be operated only from the type of power source indicated on the label on the AC/DC Adapters. If you
are not sure of the type of power supplied to your home, consult your dealer or local power company.
• Only power of the marked voltage can be used for your Sound Bar. Any other voltage than the specified voltage may cause
fire or electric shock
• The power cord must be replaced when using different voltage than the voltage specified. For more information, contact
your dealer.
• Do not defeat the safety purpose of the grounded plug.
• When connected to a power outlet, power is always flowing into your Sound Bar. To totally disconnect power, unplug the
power cord.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• The wall socket should be located near your Sound Bar and be easily accessible
• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical
storms.
• Do not attempt to repair or service Sound Bar yourself. Opening or removing the front cover may expose you to high
voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified
service personnel.
• Keep your Sound Bar away from moisture. Do not expose your Sound Bar to rain or moisture. If water penetrates into your
Sound Bar, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
• Do not use your Sound Bar if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and
contact your dealer immediately. Do not try to repair your Sound Bar yourself.
• Avoid using dropped or damaged appliances. If your Sound Bar is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use
of your Sound Bar may cause fire or electric shock.
• Do not install your Sound Bar in an area with heavy dust or high humidity. Operating your Sound Bar in environments with
heavy dust or high humidity may cause fire or electric shock.
• Ensure that the power cord and any other cables are unplugged before moving your Sound Bar.
• When unplugging your Sound Bar, hold the power plug, not the cord. Pulling on the power cord may damage the wires
inside the cord and cause fire or electric shock. When your Sound Bar will not be used for an extended period of time, unplug
the power cord.
• To reduce risk of electric shock, do not touch the connector with wet hands.
• Insert the remote control battery in accordance with instructions. Incorrect polarity may cause the battery to leak which can
damage the remote control or injure the operator.
• If any of the following occurs, contact the dealer:
- The power cord fails or frays
- Liquid sprays or any object drops into your Sound Bar
- Sound Bar is exposed to rain or other moisture
- Sound Bar is dropped or damaged in any way
- The performance of your Sound Bar changes substantially
• Unplug the power cord before cleaning your Sound Bar. Clean only with dry cloth. Do not use a liquid or a spray cleaner on
your Sound Bar. Do not use abrasive cleaners.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your
Sound Bar and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your Sound
Bar in a bookcase or cabinet unless proper ventilation is provided.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
• Your Sound Bar AC/DC Adapters are equipped with a three-pronged grounded plug (a plug with a third grounding pin).
This plug will fit only into a grounded power outlet. This is a safety feature. If your outlet does not accommodate the
three-pronged, have an electrician install the correct outlet, or use an adapter to ground your Sound Bar safely.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personal. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
• The Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall
be placed on the apparatus.
• The main plug is used as the disconnect device, the disconnect device shall remain readily operable.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Explanation of WARNING symbols:
The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of not isolated dangerous voltage within the product that may be sufficient magnitude to constitute a
risk of shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and servicing instructions in the literature accompanying the appliance.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth
7. Do not block any ventilation openings.
Install in accordance with the manufacturer's instructions.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Publicité
