Publicité
Les langues disponibles
Les langues disponibles
Follow the cautions below when using these automatic juicer machines:
TAKE INTO ACCOUNT THE WORK ENVIRONMENT
• Place the juicer on a firm, levelled surface.
• Do not install the juicer in a humid or dusty location.
• The juicer isn't thought to work in the bleakness or operating without light.
• Do not expose the juicer to the rain.
• Do not use the juicer near liquids or inflammable gases.
• Maintain the order in your working zone; this will avoid possible accidents.
• Pay attention when working with the machine and work with common sense.
DON'T SUBMERGE OR DEW THE MACHINE WITH WATER.
DON'T INTRODUCE ANIMALS INSIDE THE MACHINE.
MAINTAIN THE CHILDREN AT DISTANCE. The machine should be manipulated by qualified and properly
formed staff. The machine must be managed by adults. Don't allow the children to use or play with it. Have
special caution when the machine is working or when the front cover is open, being the squeezer inside at
sight.
TO AVOID CATCH DANGER BETWEEN THE BALLS AND THE PEELS EXTRACTOR, NEVER INTRODUCE YOUR
HAND IN THE INFERIOR PART OF THE LATERAL WHEN THE MACHINE IS WORKING.
MANIPULATE ALWAYS THE CUTTING BLADE WITH GLOVES TO AVOID A CUT.
PROTECT YOUSELF AGAINST ELECTRICAL SHOCKS. Avoid the contact of the machine with electric
conduction materials. The machine has to be always with a non conductor protector isolation in contact
with other materials.
THE REGULATION, CONSERVATION, REPAIR AND CLEANNING OPERATIONS OF THE MACHINE ARE
CARRIED OUT WITH THE MACHINE STOPPED AND DISCONNECTED FROM THE NET. If you haven't been
using the machine and before proceeding to the maintenance or the substitution of a piece disconnect it
from the net.
CONNECTION CABLE FOR EXTERNAL. Only use marked confirmed and meetly jumper leads.
THE REPAIRS WILL ONLY BE CARRIED OUT BY AN SPECIALIST. This electric machine has been manufactured
executing the rules that official organisms demand. The repairs can only be carried out by an specialist;
otherwise accidents can happen.
CONTROL IF YOUR MACHINE HAS ANY DETERIORATION.
• All the components should complete CE requirements and approvals to guarantee the perfect working
of the machine.
• Any deteriorated piece, switch or feeding cable will be changed or repaired by a post-sale service
workshop, or by qualified staff to avoid any danger.
58
EN
10. CAUTIONS
Publicité
