CLEANING FREEZER JUICER ( Weekly recommendation)
- Remove first the cover of the desposit.
Release (1) and remove (2) the plate from
the bomb's fixing cap ( fig.1)
Picture 1
- Remove the join of the container and take
out the turbine pump.
Torealese the tap with the rubber tube, push the
tap lever (1) and taje out (2) exit rubber tube from
its vertical position in the bottom of the container
(fig.3)
4º) . Finally, remove the drops tray and empty.
5º) . Clean all the parts in a bucket with hot water and neutral detergent, and clean carefully the parts with the
help of a brush.
6º). Mounting
- Install the drops tray.
- Install the tap, pushing the tap lever (1);
insert the rubber tube in a vertical position
at the end of the deposit (2) and push up (3)
softly from one extreme of the rubber until
it is completely fixed (fig.5)
Picture 3
Picture 5
- Remove the cap from the bomb and take the
empty deposit, lifting it from the back side and
removing from the join. (fig2)
- To release the steel tap, take out the rammer
(1) and dismount the tap lever ( fig.4)
- Mounting the stainless steel tap, placing the tap
lever (1-2) and thread the tamper to its joint
(fig.6)
Picture 2
Picture 4
Picture 6
EN
55