Publicité
Les langues disponibles
Les langues disponibles
CARE AND MAINTENANCE
To clean, unplug lamp and wipe with a damp, non-abrasive cloth.
TROUBLESHOOTING
PROBLEM
The light will not go on.
Fuse blows or circuit trips
when fixture is turned on.
The fixture shakes in high
winds.
3-YEAR LIMITED WARRANTY
If this product fails due to a defect in materials or workmanship within three (3) years from the date
of purchase, return it along with proof of date of purchase and it will be replaced with the same or
comparable model free of charge.
This warranty is void if damage or defect has resulted from accident, abuse, misuse or faulty repair.
This warranty gives you specific legal rights and you may have other rights that vary from state to
state.
IN NO EVENT WILL LIABILITY EXTEND TO ANY CONSEQUENTIAL, SPECIAL, INCIDENTAL
OR INDIRECT DAMAGES OF ANY KIND ARISING OUT OF THE USE OR MISUSE OF THIS
PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE EXCLUSION OR LIMITATION
MAY NOT APPLY TO YOU.
POSSIBLE CAUSE
1. No power.
2. Fixture may be wired
incorrectly.
3. Switch may be wired
incorrectly.
Crossed wires or power
wire is grounding out.
The screws and nuts may
be secured incorrectly.
149B Houston Rd Troutman NC 28166
Ningbo UTEC Electric Co.,LTD
CN8, Far East Industry Park, Yuyao, China
Please call our Customer Service line at 877-714-8669
for assistance Monday - Friday 9 a.m. to 5 p.m. EST
LUTEC USA LLC:
www.lutec.com
service@lutec.com
8
CORRECTIVE ACTION
1. Make sure lamp fixture is
plugged in and power is on.
2. Check wiring.
3. Check wiring.
Consult a certified electrician.
Make sure the screws and
nuts were secured tightly.
Printed in China
.
Publicité
