Publicité
Les langues disponibles
Les langues disponibles
12.
Remove the preassembled nut and washer from
expansion bolts (AA). Then put the expansion bolts (AA) into
the drill holes.
Hardware Used
AA
Expansion Bolt
C
13. Connect bare ground wire from the base (D) to the ground
wire coming from the ground by twisting a wire nut (EE) onto
bare ends of the wires. Connect white wire from the base (D)
to the white wire coming from the ground by twisting a wire
nut (EE) onto bare ends of the wires. Connect the black wire
from the base (D) to the black wire coming from the ground
by twisting a wire nut (EE) onto the bare ends of the wires.
Secure the wire nuts (EE) with electrical tape.
Hardware Used
Wire Nut
EE
14. With the help of another person, align the holes on base (D)
with the expansion bolts and carefully place the pole
assembly over the positioning paper. Secure assembly with
washers and nuts removed in step 12.
the
12
x 3
13
x 3
7
AA
0
EE
Publicité
