TooQ TQE-3509B Manuel De L'utilisateur page 8

EN
Hardware installation
1. Unscrew the external enclosure and extract the PCB
board.
2. Install the hard disk on the PCB board.
Caution: Do not touch the chipset on the PCB board or the
guarantee will be void.
8
3. To get a better grip on the hard disk, place the two
plates on the sides.
Clamping plate
Clamping plate
4. Insert the hard disk with the board PCB into the exter-
nal enclosure by sliding the side plates into the guides and
close it completely with the two screws.