Perel TC78011LCD Mode D'emploi page 6

6. Installation
1. Turn the heater upside-down and install a bracket between the outermost fins on each side
of the heater.
2. Fix the two wheels onto the bracket with two wingnuts.
3. Install vertically on a flat, dry, stable and non-slippery surface.
7. Operation
7.1 General Operation
1. Insert the power plug into the mains.
2. Press the on-off button. The display blinks once and the appliance is ready for use.
3. Press MODE to enter the setting mode.
4. Select the measurement unit with °C/°F.
5. Now, set the temperature with the increase/decrease button. The set temperature value
will be displayed.
6. Press MODE again to enter the timer switch-on mode. Set the switch-on timer with +/-.
7. Press MODE again to enter the timer switch-off mode. Set the switch-off timer with +/-.
V. 02 – 14/06/2018
TC78011LCD
6 ©Velleman nv