Blackstone Culinary Serie Manuel Du Propriétaire page 14

Owner's Manual |
dle
r.)
Insert one (1) AA battery (not
included) into the battery socket
with the positive terminal facing
nega-
out, then screw on the ignitor
button until tight. Be careful to not
over tighten.
osi-
rner
e.
e-
3-7mm
n of
Ensure that the ignition needle is
positioned 3-7mm away from the
burner tube, positioned above a
burner hole.
10
Assembly Guide
S t E P 0 8
position. Insert one AA battery under the ignition button.
S t E P 0 9
screws to install one (1) side shelf
bracket L and one (1) side shelf
bracket R to the right side of the
griddle body.
Repeat this step on the left side of
the griddle body.
(Note: There are two types of
brackets. Ensure that both sides of
the griddle use one of each.)
S t E P 1 0
preinstalled step bolts from the
bottom of the right side shelf.
Repeat this step with the left
side shelf.
Place the three (3) control knobs onto the valve stems in the OFF
Use four (4) M6x16
Remove the two (2)
Model 1934
R
L L