Miele PWM 909 Schéma D'installation page 31

Connector Box
Peak load / energy
management
Liquid dispensing
connection
Payment device
Optional accessories
Only use genuine Miele spare parts and accessories with this ma-
chine.
Using spare parts or accessories from other manufacturers will in-
validate the guarantee, and Miele cannot accept liability.
The Connector Box allows external hardware from Miele and other
suppliers to be connected to the Miele Professional washing ma-
chine.
The Connector Box is supplied with mains voltage by the Miele Pro-
fessional washing machine.
The separately available set consists of the Connector Box and
fasteners for installation on the machine or on the wall.
A peak-load or energy management system can be connected via the
Connector Box.
The peak-load negotiation monitors the energy consumption of a
system and deactivates individual pieces of equipment temporarily
in order to ensure that certain total load limits are not exceeded.
Monitoring is externally controlled.
When the peak-load function is activated, the heating is deactivated
and the programme stopped. A message appears in the display to in-
form you of this.
The programme is resumed automatically when the peak-load func-
tion finishes.
External liquid dispensing pumps with a "container empty" indicator
or flowmeter can be used to dispense liquid detergents.
The dispensing pumps can only be programmed by the Miele Cus-
tomer Service Department using the Miele Diagnostic Support sys-
tem (MDU).
It is particularly important to observe manufacturer's instructions
when using a combination of cleaning agents and special application
products.
The washing machine can be fitted with a single-machine payment
system as an optional accessory via the Connector Box.
The programming required for connecting a payment system can be
carried out during the initial commissioning process. After initial com-
missioning, changes may only be carried out by your Miele dealer or
the Miele Customer Service Department.
en - Installation notes
31