EN
Location and ventilation
This unit must be installed according to the
below condition:
If the unit is installed in a location against the
below conditions, it's specified performance
may not be achieved or malfunction and acci-
dence may occur.
Steps:
1. A location not exposed to direct sunlight
2. A location where the unit is not exposed
to rain
3. In a dry, well ventilated room
according to the described in Intended
use
4. Away from sources of heat
5. In a location with minimal variations in
temperature
Secure ventilation, above, below and around
the appliance. See illustrations.
(All dimensions are in millimeter (mm).
Note!
There need to be space for the door to open
in at least 90 degrees.
Vestfrost Solutions
17