Publicité
ENGLISH
PARTS
1. On/off switch
2. Foil screens
3. Cutter assembly
4. Charging indicator lights
5. Hairpocket
6. Power port
7. Pop-up trimmer
GETTING STARTED
CHARGING YOUR SHAVER
1.
Ensure the product is switched off.
2.
Connect the shaver to the adapter and then to the mains.
CHARGING INDICATOR LIGHTS
Charge Level
Charging
Fully Charged
Low charge/charging
required
Battery capacity 50%
or higher
Battery capacity 50%
or lower
•
Run time from fully charged is up to 45 minutes.
•
Charge time from empty is 4 hours.
•
To preserve the life of your batteries, let them run out every 6 months then recharge
for 24 hours.
INSTRUCTIONS FOR USE
It is recommended that you use your new shaver daily for up to four weeks to allow time for
your beard and skin to become accustomed to the new shaving system.
4
8. Head release buttons
9. Head lock button
10. Stubble head gaurd
Not shown:
11. Adaptor
12. Cleaning brush
Lights
The lights will come on one after the other then go off in
a repeating pattern.
Both lights will come on for 5 minutes then go out.
The bottom light will flash rapidly.
Both lights will come on.
The bottom light will come on.
Publicité
