TecTecTec XPRO4+ Mode D'emploi page 9

1.Installing Micro SD Card
Note: Please choose a branded Micro SD card U3 (minimum for 4K) and 64Gb maximum, and
then format it with the computer before using it. We suggest a high quality SD card for the perfect
result.
2.Installing and removing battery
Correctly install the battery into the camera as indicated by +/- sign and make sure it is in the
correct direction with the arrows marked on the battery before you fit it in.
Battery Gauge: Please refer to diagram
Removing the Battery: Open the cap and pull the battery out.
3.Charging
You can charge the XPRO4+ Camera by connecting it directly to the computer or with the
power adapter.
It can be also charge with a car charger
The camera can be charge even the power is switch off.
4.Switching the camera on and off
Press and hold the power switch for 3 to 5 seconds to turn it on/off
5.Mode Switching
Switch between video recording/ Photo shooting/ Playback by pressing the power button as
mode function.
English
Quick start guide