TecTecTec XPRO4+ Mode D'emploi page 10

6.Video recording & Setting configuration
(1)Video Recording
Switch to recording mode and there'll be an
Press OK to start the recording and the
Press "OK" again if you want to stop and the
(2)Photo shooting & Settings
Switch the camera on and press "Mode" to select "Photo shooting Mode", there'll be an
icon in the upper left corner of the screen display and the camera is in photo shooting mode.
Press "OK" to take photos.
(3)Data Storage & Playback
You can use the USB cable to transfer the file to the computer or you can remove the micro SD
card with the card reader.
7.WI-FI connection
(1)The camera can connect to a mobile phone with android or IOS system via WIFI, the
operation steps are as following:
A.Install "XproCam" software on a mobile phone. You can search and download on Google Play
for android system, or search and download on APP Store for IOS system.
B.After power on, press WIFI key for
screen.
C.Enable WIFI on a mobile phone or a panel computer, search WIFI account for the camera,
then connect, and the initial Password " 1234567890" will display on screen.
D.When WIFI connected, WIFI Connection Ready displays on the screen,
E.After "XproCam"
recorded by the camera will be real-time displayed on a mobile phone or a panel computer. You
can operate via related icons related to the software or set function parameters of the camera
3 secondes
software operates on a mobile phone or a panel computer, images
icon in the upper left corner of the screen.
icon will start to flash.
icon will disappear.
on the camera, WIFI icon displays on the
English