PCWork PCW01A Mode D'emploi page 16

AC/DC Current Measurement
1. Turn the rotary switch to the DC current or AC current
measurement function. Then select the appropriate range.
2. When dealing with an unknown current range, always start with
the higher measurement range, then switch to a lower range,
if applicable.
3. Insert the red probe in the "10A" socket (current >600mA) or
the " " Socket (current <600mA), depending on the
measurement range chosen prior, and insert the black probe
in the "COM" socket.
4. Connect the probes' tips in series to the measuring circuit,
measure the current.
5. The measurement result is displayed on the screen.
16