Publicité
Les langues disponibles
Les langues disponibles
Installation Steps
Begin removing the tape liner starting in position (1) above. Grasp the exposed portion of tape liner (See Step 4 and 5 above),
and pull gently with one hand, while applying light, even pressure to the Aeroskin with the opposite hand. NOTE: You must apply
light, even pressure in the direction indicated by the arrow below in order for proper adhesion to hood.
11
Repeat as above for tape liner position (2).
12
Repeat as above for tape liner position (3).
13
Repeat as above for tape liner position (4).
14
NOTE: Actual application may vary slightly from illustrations.
1
2
Page 4 of 7
3
4
Publicité
