Carbest 82285 Manuel D'utilisation page 15

Carbest Sinus Power Inverter | 82282/82283/82284/82285/82286
NOTES
• Before installing the inverter make sure the main switch must be OFF.
• Before using the remote unit make sure the main switch must be Remote.
• Ensure the remote control setting is off.
DC input terminals
Connect to 12 V battery or the other power sources. (+) is positive, (-) is negative. Reverse
polarity connection will blow internal fuse and may damage inverter permanently.
Model
Minimum
12 V
Protection features
Modell
Over voltage
Shutdown
12 V 16 V
NOTE
The specifications are subject to change without notice.
INSTALLATION
Please use the provided cables to connect the unit to the battery.
The input terminals on the rear side of the unit are Red (Positive) and Black (Negativ).
Connect the red cable to the red terminal and to the positive pole of the battery. Connect
the black cable to the black terminal and to the negative pole of the battery.
It is strictly recommended to add a fuse as close as possible to the positive pole of battery.
Make sure all connections are solid and secured. Poor connections may cause overheating
the cable and shorten the battery backup time.
Ensure that the inverter is OFF before connecting with the battery.
DC input voltage
10,5 V
DC input (VDC)
Under voltage
Restart Alarm Shutdown Restart
13 V 11 V <10,5 V
Maximum
15 V
Over temperature
Shutdown
12,5 V 55 °C
15
protection
Restart
45 °C
DE
EN
IT
ES
FR
NL
FI
DK
SE