WIMIUS P62 Mode D'emploi page 8

support01@wimius.com
• Digital Zoom
With the zoom value at 100%-50%, Just click "OK" button enter,and then press the button " ▲ " or " ▼ " to set the value
needed as shown below.(Note: The zoom value will be affected by the value of four-point keystone correction)
• Correction setting
Trapezoidal Correction Reset: Press ''OK'',the image will restore to the original keystone correction settings.
EN
12
3.Connect input devices and then choose signal source button to choose
corresponding signal source ( HDMI1, HDMI2, AV,etc)
For the USB devices, no need to choose the signal source. The machine will detect them
automatically.
Just operate through the remote control: Press "
signal input channel, then press "OK'' to confirm.
support01@wimius.com
" and then press " ◀ ▶ " or " ▲ ▼ " to choose the corresponding
EN
13