Télécharger Imprimer la page

Pelgrim PVD 9144M Notice D'utilisation page 19

Publicité

Les langues disponibles

Les langues disponibles

Choosing the Right Place
Place the appliance in a dry and regularly ventilated
room. Allowed ambient temperature depends on the
model (class) of the appliance and is stated on the
rating plate of the appliance.
Never place the appliance near heat emitting
devices (e.g. cooker, radiator, water heater and
similar devices) and do not expose it to direct
sunlight.
The appliance should be positioned at least 3 cm
away from the electric or gas cooker and at least 30
cm away from the radiator. If this is not possible,
use an appropriate insulation.
Behind the appliance there should be free space at
least 200 cm² wide and above the appliance the high
kitchen units should be at least 5 cm away from the
appliance in order to assure adequate ventilation of
the condenser unit.
Class
SN (sub-normal)
N (normal)
ST (sub-tropical)
T (tropical)
Connection to Power Supply
Connect the appliance with the cable and plug to the
power supply socket outlet with a ground terminal
(safety socket).
Required nominal voltage and frequency are
indicated in the rating plate.
The connection to the mains supply and earthing
have to be made according to current standards and
regulations. The appliance resists temporary voltage
tolerance up to -15 to +10 %.
Ambient temparature
from + 10°C to + 32°C
from + 16°C to + 32°C
from + 18°C to + 38°C
from + 18°C to + 43°C

Publicité

loading

Ce manuel est également adapté pour:

Vk 8144aPvs 8144a/p01Pvd 9144a/p01