D-Link COVR-C1203 Guide D'installation Rapide page 5

4
Wait for the 2.4 GHz and 5 GHz wireless LEDs to turn on.
Note: If your router does not have 2.4 and 5G wireless LEDs, refer to
/
the User Manual for LED behaviour.
5
Connect your computer to the Wi-Fi name and password printed
/ on the Quick Installation Card, or on the device label on the bottom
of the device.
6
Type http://covr.local./ into the address bar of a web browser.
/ Follow the on-screen instructions to complete the setup.
ENJOY!
You're all good to go! Connect devices to your network using the
Wi-Fi Name (SSID) and password that you created during the setup
process.
2.4 5G
http://covr.local./
I
3