D-Link COVR-3902 Guide D'installation Simplifié

Simple Setup Guide
Before You Start
Check the contents of your Covr Wi-Fi System with
1
the list on the right. Be sure to keep the Router and
Extender close to each other during the setup process.
Connect the four antennas to the router by screwing
2
them in clockwise.
Connect the power adapter to the Covr Router and
3
plug it into a power outlet. Wait for the 2.4G and 5G
LEDs to light up solid green and then proceed to the
next step.
TIP: If the Power LED does not light up, press the
Power button on the back of the Router.
There are two easy ways to configure your
Covr Wi-Fi System:
D-Link Wi-Fi App (iOS and Android Devices)
Download the D-Link Wi-Fi app from the App Store or
1
Google Play. Run the app and tap Add Device to get started.
Browser Setup (PC/Mac/Mobile device)
You can use either a wired (Ethernet) or wireless (Wi-Fi)
1
connection to set up your Covr Wi-Fi System.
Wired – Connect the Ethernet port on your computer to
one of the four black ports on the Covr Router.
Wireless – Connect to the Covr Wi-Fi using the Wi-Fi Name and
Password on the Wi-Fi Con guration Card or the Covr Router.
2
Type http://covr.local./ into a web browser and follow the
instructions to complete the setup.
For more support, please visit: support.dlink.ca/COVR-3902
All manuals and user guides at all-guides.com
AC3900 WHOLE HOME WI-FI SYSTEM | COVR-3902
Covr Router Covr Extender Power Ethernet
COVR-2600R COVR-1300E Adapter x2 Cable
D-Link Wi-Fi
1.800.361.5265
Version 1.02(CA) | 2017/06/29 6CV3902...D3G
Wi-Fi
Antenna x4
Card