Télécharger Imprimer la page

Frigelux MINIBAR28 Manuel D'utilisation page 22

Publicité

Les langues disponibles

Les langues disponibles

Recommendation combination:
The following combination of drawers, baskets, and shelves is recommended for energy
to be used as efficiently as possible by the refrigeration unit. The shelves placed in factory
mode is the most efficient use of energy for the refrigerating appliances.
Cleaning before use
Wipe the inside with a weak solution of bicarbonate of soda. Then rinse with warm water
using a damp sponge or cloth. Wash the baskets and shelves in warm soapy water and
dry completely before placing them back.
Before plugging in
Check that you have a socket which is compatible with the plug supplied with the
appliance.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30
minutes before switching back on to allow the coolant fluid to settle.
Before filling your appliance
Before storing items in your appliance, turn the appliance on and wait for 4 hours, to make
sure it is working properly and to allow it to reach the correct temperature. The appliance
will have better performance at ambient of 20-25 degree; We suggest the refrigerator be
powered off if the ambient temperature is lower than 10 degrees. ·After plugging the
appliance, allow the unit to cool down for 2-3 hours before placing beverage into the
refrigerator compartment. ·Ventilation is very important for this kind thermoelectric
refrigerator; The inside PCB will be broken easily if the ventilation is bad; It will also reduce
the life of the refrigerator.
Food preservation and storage.
The storage of foodstuffs must comply with the regulatory conservation temperatures
established by the National Agency for Food, Environmental and Occupational Health
Safety (ANSES). Failure to comply with these storage temperatures involves risks of
poisoning and food waste.
21

Publicité

loading