Publicité
Les langues disponibles
Les langues disponibles
B
Product usage
•
When the Child Lock is set, all function buttons will be shielded.
•
When you turn off the machine,child lock is released.
•
After completing program, child lock will automatically unlock.
To Start the Program
After you have selected your options and placed detergent withinthe detergent dispenser,
turn on the water tap and press the "
progression. It also displays the remaining program time.
To Cancel the Program or Reselect the Options
1.
Press the "
" button for 3 seconds to turn off the machine.
2.
Select the new program and options.
3.
Press "
" button to turn on the machine without adding any extra detergent.
End of the Program
The washing machine shows "END" at the end of the program, when the door is unlocked.
Press the "
" button, the power will be cut off. If there is no button or knob operation within
2 minutes, the program will automatically power off.
Reload in Process
If you want to reload clothes in the process of washing, please press "
•
If reload icon
light up, the door can be opened in the process, remaining time and the
Door Lock icon in display will flash. Then the Door Lock icon will go out, and the door
can be opened.
•
If reload icon
doesn't light up, the Door Lock icon doesn't flash, it indicates that current
temperature is over 50°C or you have passed the time for reloading in the process, namely
no clothes allowed to load into the machine.
Programme Instructions
1.
The eco 40-60 programme is able to clean normally soiled cotton laundry declared to be
washable about 40°C to 60°C, together in the same cycle, and that this programme is
used to assess the compliance with the EU ecodesign legislation.
2.
The power consumption of the off-mode is 0.49W.
3.
The most efficient programmes in terms of energy consumption are generally those that
perform at lower temperatures and longer duration.
4.
Loading the household washing machine up to the capacity indicated by the manufacturer
for the respective programmes will contribute to energy and water savings.
5.
Correct use of detergent, softeners and other additives. Do not apply excessive detergent.
This may affect the washing results adversely.
6.
Periodic cleaning, including optimal frequency, and limescale prevention and procedure.
7.
Noise and remaining moisture content are influenced by the spinning speed: the higher
the spinning speed in the spinning phase, the higher the noise and the lower the remaining
moisture content.
8.
The product information and QR code are reflected in the energy consumption label, the
product registration information can be obtained by scanning the QR code.
9.
The information of standard programmes.
" button. The screen will display the current program
20
EN
" button.
Publicité
