Franke FMYCF 906 Manuel D'utilisation page 10

4. CONTROLS
Key Key pressing Function
L Short
Long
T1 Short
Long
T2 Short
Long with all loads
off (motor
lights)
T3 Short
Long press with all
the loads off (mo-
tor and lights)
T4 Short
Long
S1 -
-
5. REMOTE CONTROL
• This appliance can be controlled us-
ing a remote control.
6. LIGHTING
• Please contact the Service Depart-
ment to change it ("Please contact
the service department to purchase
it").
10
Light On - Medium Light - Light Off.
It is possible to change the intensity of the light cyclically, perform-
ing long separate presses.
This allows varying of the tone of the light between "warm" and
"cold".
Turns the motor on/off at the first speed.
Delay Function
It activates/deactivates the Delay function (automatic shutdown of
the Motor and function of lighting delayed by 30').
Cannot be activated with Intensive on.
It turns on the motor at the second speed.
Activates/Deactivates the Activated Carbon Filters alarm.
and
Turns the motor on at the third speed.
The Filter saturation alarm is reset.
Turns the motor on at the Intensive speed.
This speed is timed for 6 minutes. At the end of the time, the sys-
tem automatically returns to the previously selected speed. If activ-
ated with the motor off, once the time has elapsed, it switches to
OFF mode.
It is deactivated by pressing the same button or by switching off
the motor.
Activates/Deactivates the remote control.
Signals the Metal Grease Filters saturation alarm and the need
to wash them. The alarm goes into operation after 100 hours of ac-
tual hood work.
Signals the Activated Charcoal Odour Filter saturation alarm.
The alarm goes into operation after 200 hours of actual hood work.
LED
-
-
Fixed
Flashing
Fixed
LED flashes twice:
alarm activated.
LED flashes once:
alarm deactivated.
Fixed
LED S1 flashes 3 times.
Fixed
The LED flashes twice:
remote control activ-
ated.
The LED flashes once:
remote control activ-
ated.
Fixed
Flashing