Fanelite CR-66516 Mode D'emploi page 33

6. HOW TO CHARGE
Before charging or recharging your appliance, carefully read the
section warning for the rechargeable battery in this manual.
Using the included AC adapter, plug its cable into the DC input located on
the device and plug the socket into the mains. The battery indicators flash,
indicating that the battery is charging as well as the charge level (25-50-
75-100%). Leave to charge (for a full charge) for approximately 4 hours.
Then disconnect the cable. Your device is ready to use. When the battery
is almost discharged, the 25% battery indicator flashes. Then recharge
the device. It is normal for the fan head to heat up slightly during charging.
Do not use the device while charging, turn off the device.
33