Bticino HS4451 Manuel D'utilisation page 54

1
Introduction and standard functions
Your Chronothermostat: use it now!

 First activation
To enable the Chronothermostat:
• select the functioning Language
• set Date / Time
• the Chronothermostat automatically sets to Winter mode and-
Weekly PROGRAMME1 mode.
The display shows the currently set selection.
(Italian factory setting)
• The ÅÇ keys can be used to scroll the list and select the language
• Press OK to confirm
After confirming, the Chronothermostat switches to the Set DATE
and TIME menu
• Set time and date with keys: ÅÇ increases/decreases the selected
digit, ÉÑ scrolls the time and date digits
• Press OK to confirm
• Hold down the C key to exit the menu and return to the main
page
The Chronothermostat will automatically set up as follows:
- Winter mode
- Weekly-PROGRAMME1 mode
To set the Summer mode
• press OK to access the menus
• select Setup with theÇkey
• press OK to confirm
Complete the setup by following the procedure described on pag. 57.
Daylight saving time: if the default setup is kept, "Manual"
must be updated manually; to set up the "Automatic"
update mode, see paragraph "Set Daylight saving time"
on pag. 57.
 Navigation keys
When the main screen is displayed, the following operations can be
executed with the navigation keys:
OK Key accesses the Main menu - confirm
C Key cancels and returns to the previous mode
depending on the preset mode:
ÅÇKeys
Weekly – Manual – Timed: increase / decrease in the
current temperature;
Holidays – Antifreeze – OFF: no effect
ÉÑKeys cycle through the functioning modes
 View the functioning modes
When the Chronothermostat display shows the Screen saver (or
when it is off), the preset functioning mode will be displayed if any
key is pressed.
54