Publicité
Les langues disponibles
Les langues disponibles
12
English
3.2.25 W
arning
the machine on.
3.2.26 W
arning
3.2.27 W
arning
3.2.28 W
arning
and that exhaust gases are vented correctly (Poisoning hazard).
The exhaust gas vent hole must not be closed.
Make sure that no exhaust gases are emitted close to the air intakes.
3.2.29 W
arning
Also ensure that the machine is in a firm, stable position.
3.2.30 W
arning
maintenance, storage and transportation.
3.2.31 W
arning
impedance at the connection point (see "Technical Data" chart).
Contact the electricity provider in case of further clarifications about the
permissible system impedance.
. Insert the drain pipe cleaning kit down to the red mark before turning
. Do not leave the machine in operation unattended
. When filling up, do not allow diesel to come into contact with hot parts.
. If using the machine indoors, ensure that there is sufficient ventilation
. The motor must not be running during transportation of the machine.
. Switch the machine off before assembly, cleaning, adjustments,
. DO NOT to exceed the maximum electrical permissible system
Publicité
