AEG FFB83836PM Notice D'utilisation page 12

12 www.aeg.com
–
–
2. Press Start to change the setting.
3. Press on/off to confirm the setting.
6.4 The rinse aid level
It is possible to set the released quantity
of rinse aid between level 1 (minimum
quantity) and level 6 (maximum quantity).
Level 0 deactivates the rinse aid
dispenser and no rinse aid is released.
Factory setting: level 4.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press Delay.
• The indicators
and
• The indicator
• The display shows the current
setting: e.g.
– The levels of rinse aid range
2. Press Delay repeatedly to change
the setting.
3. Press on/off to confirm the setting.
6.5 AirDry
AirDry improves the drying results with
less energy consumption.
= the rinse aid empty
notification is deactivated.
= the rinse aid empty
notification is activated.
,
are off.
still flashes.
= level 4.
from 0A to 6A where level 0A
means no rinse aid is used.
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for another 3
minutes, the running
programme ends.
AirDry is automatically activated with all
programmes excluding
applicable).
To improve the drying performance refer
to the XtraDry option or activate AirDry.
CAUTION!
If children have access to the
appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press Option.
• The indicators
and are off.
• The indicator
flashes.
• The display shows the current
setting.
– = AirDry is deactivated.
– = AirDry is activated.
2. Press Option to change the setting.
3. Press on/off to confirm the setting.
(if
,
still