Télécharger Imprimer la page

EcoFlow RIVER MAX 600 Mode D'emploi page 15

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Entry-Level UPS User Guide
Users can connect the AC charging cable of RIVER MAX to grid power, connect a device to RIVER MAX, and
turn on the AC switch to automatically enter the entry-level UPS mode. When the external power is cut off,
power will be supplied from the battery of RIVER MAX immediately to power your device (as shown below).*
UPS is only applicable to electrical appliances below 600W. Please do not use other equipment at the same
time to avoid overloading the power station. EcoFlow is not responsible for any detrimental operations or
data loss caused by careless use. Only one RIVER MAX can conduct the UPS function; the UPS function is not
available when more than one RIVER MAX is connected together. Please follow the connection instructions
below:
AC X-Boost Mode
The EcoFlow X-Boost featured is recommended for use when powering devices between 600W-1200W. As a
result, there is no need to buy additional devices in order to power different products. Traditional inverters will
overload when one electrical appliance with a higher rated power is connected. Please take note of the following
when using X-Boost:
1. The X-Boost mode is enabled by default. You can use the EcoFlow app to turn this function on/off. Please
do not connect the AC output to grid power when the X-Boost mode is on, doing so will activate the low-volt-
age protection of the power station;
2. The X-Boost mode is not available when using a parallel connection or when charging;
3. When using appliances with a rated power of 600W-1200W, please connect only one appliance. When con-
necting more than one electrical device, the change of voltage may affect the usage of other electrical devices.*
* The X-Boost mode is not applicable for all electrical devices. Some devices with a rated power of
600W-1200W that have strict voltage requirements are still not compatible. Please conduct a full test to
confirm before usage. X-Boost is recommended for electrical equipment with heating elements and a rated
power between 600-1200W, such as hair dryers, kitchen appliances, or tools.
10
Power A Free Life

Publicité

loading