Publicité
Les langues disponibles
Les langues disponibles
SYMBOLS
The followings show the symbols used for tool.
V............................volts
A ...........................amperes
Hz..........................hertz
....................alternating or direct current
.....................Class II Construction
.../min....................revolutions or reciprocation per
minute
....................number of blow
FUNCTIONAL DESCRIPTION
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on
the tool.
Switch action
1
CAUTION:
•
Before plugging in the tool, always check to see
that the switch trigger actuates properly and returns
to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
ASSEMBLY
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
USD293-1
003502
1. Switch trigger
Side handle (auxiliary handle)
1
2
The side handle swings around 360° on the vertical as
well as back and forth on the horizontal. Turn the clamp
nut clockwise to secure the handle in the desired posi-
tion.
Installing or removing the bit
There is a raised dimple on one of the faces of the tool
retainer handle where you grip it. Pull out and then turn
the tool retainer so that the dimple faces toward the large
opening in the end of the tool (tool holder). The shank of
the bit is then inserted into the tool holder with the
notched portion on the shank facing back toward the tool
retainer. Insert the bit into the tool holder as far as it will
go.
1
2
3
Never use B-type shank bits. They can cause damage to
the tool.
37
19
A
Then pull out and turn the tool retainer 180 degrees (1/2
turn) to secure the bit. The dimple will now be facing
away from the tool holder and bit. Hold the tool securely
and try to forcefully pull the bit out of the tool holder to be
sure that it has been properly retained.
4
002905
1. Clamp nut
2. Side handle
002924
1. Bit
2. Dimple faces
4
3. Tool retainer
4. Notched portion
27
38.5
19
B
002925
37
16
Publicité
