Publicité
Les langues disponibles
Les langues disponibles
TABLE OF CONTENTS
1
SAFETY PRECAUTIONS - BEFORE YOU BEGIN
4
MODEL NUMBERS
4
RATING LABEL
5
REGULATORY / CODE REQUIREMENTS
5
USING THE VENTILATION SYSTEM
6
CLEANING AND MAINTENANCE
9
TROUBLESHOOTING
10
DUCTING DO'S AND DON'TS
11
INSTALLATION
15
VENT ACCESSORIES
16
DUCT COVERS
17
PARTS / SERVICE
17
LIMITED WARRANTY
SAFETY PRECAUTIONS - BEFORE YOU BEGIN
When properly cared for, your Hestan ventilation system will provide safe, reliable service for many
years. When using this ventilation system, basic safety practices must be followed as described in
the following pages.
IMPORTANT: Save these instructions for the local Utility Inspector's use.
INSTALLER: Please leave these Installation Instructions with the owner.
OWNER: Please read these Instructions and save them for future reference.
ELECTRICAL SHOCK HAZARD
It is the responsibility of the user to have the appliance connected
by a licensed electrician in accordance with all applicable codes and
standards, including fire-related construction. See step 10 - "WIRING
CONNECTION:" on page 14 for details.
ELECTRICAL SUPPLY AND GROUNDING
•
This appliance must be grounded. See step 10 - "WIRING CONNECTION:" on page 14 for
details.
•
This appliance must be connected to 120 VAC Single Phase, 60 Hz, with a 20 amp dedicated
circuit.
•
OWNER: Have the installer show you where the electric circuit breaker is located so you know
how to shut off the power to this appliance.
Suitable for use in covered outdoor applications when installed in a GFCI protected branch circuit.
©2019 Hestan Commercial Corporation
EN
1
Publicité
