Ryobi RBCLLG1 Traduction Des Instructions Originales page 3

Safety, performance, and dependability
have been given top priority in the
design of your cross line laser.
INTENDED USE
The cross line laser is intended to be
used only by adults who have read
and understood the instructions and
warnings in this manual, and can be
considered responsible for their actions.
The product is intended for determining
and verifying horizontal and vertical lines.
Do not use the product for any other
purpose. Use of the product for
operations different from intended could
result in a hazardous situation.
CROSS LINE LASER SAFETY
WARNINGS
Laser radiation. Do not stare into
beam. Class 2 laser product.
Risk of severe eye injury if the laser
beam is directed at persons or
animals. Avoid direct eye exposure.
Do not direct the laser beam
towards other people.
Do not operate the product around
children or allow children to operate
the laser.
Avoid using the product on reflective
surfaces. The laser beam may be
reflected at the operator or other
persons.
Store the product indoors and avoid
substantial knocks,
vibration or extreme temperatures.
Always keep the product away from
dust, liquids and high humidity. They
may damage internal components
or affect accuracy.
If laser beam hits your eye, you must
close your eyes and immediately
turn your head away from the beam.
Do not position the laser beam so
that it unintentionally blinds you or
others.
Do not look into a laser beam using
magnifying optical devices such as
binoculars or a telescope. This will
increase the level of eye injury.
If you use laser goggles to enhance
the visibility of the laser beam, note
that they will not protect your eyes
against laser radiation.
Do not remove or deface warning
labels on the product.
Do not disassemble the product.
Avoid heavy impact to or dropping
of the laser. The accuracy of the
laser should be checked before use
if it has been dropped or subjected
to other mechanical stresses.
Do not operate the product in
explosive areas or in extreme
environments.
KNOW YOUR PRODUCT
See page 81.
1. Exit window for laser beam
2. Self-levelling LED indicator
3. ON/OFF switch
4. Battery door
5. 1/4" tripod mount
6. Battery
7. Clamp
continuous SELF-LEVELLING LED INDICATOR
LED
indicator
Green
Explanation
Self-leveling is
complete.
English |
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
1