Publicité
Les langues disponibles
Les langues disponibles
G60022 DESCRIPTION
1 Air outlet grille
5 Display
ON REMOTE CONTROL
2 On/Off button
11 LOCK button
15 DELAY button
BUTTONS
On the unit
• ON/OFF general (4) enables or disables any function.
• ON/OFF (2) for turning on/off the unit in heating function (lights
On the remote control
• ON/OFF button (2) for turning on/off the unit.
• 24H (9) sets the timer 1-24 hours
• MODE (10) sets working modes: fan (
• LOCK (11) for button locking.
• WEEK/TIME (12) for the weekly programming function.
• SET (13), to set the time.
• AUTO (14) to activate the window detection function.
• DELAY (15) to set temperature in the weekly programmer
• TEM. (16) to display current time.
• + e - (8) to set temperature and hour.
Display
The 4 digits display can show the time (hours and minutes), the timer or the temperature.
In the case of temperature, the 4 digits show:
-
Ambient temperature for first and second digit
-
Temperature setting for third and fourth digit
Example: if on display is written "2125", it means that the actual ambient temperature is 21 degree, and the
desired temperature is 25 degree.
OPERATION
Install the product as described in the "Installation and Assembly" paragraph.
Insert in the remote control a battery 3V, type CR2025 or CR2032.
Bring the general ON/OFF button (4) in position "I".
- Press the power button on remote control (2). The appliance starts working in ventilation mode (
- Press the button MODE (10) on remote control once to activate the heating function on low power. The
icon " " will light up on the display.
- Press the button MODE (10) on remote control twice to activate the heating function on high power. The
icon "
" icons will light up on the display. Pressing again MODE, it will return in ventilation mode.
- Press the button (2) on unit or remote control to turn it off. The device will stay on in ventilation mode for
few seconds and then it turns off.
Switch on appliance in any function mode ( ,
The heater has a timer up to 24 hours; to activate it, press the button 24H (9) from 1 to 24 times.
On display appears the time set and the icon
- Switch on appliance in any function mode ( ,
- Set the desired temperature (third and fourth digit on display) from 10 to 49°C, with buttons "+" and "-"
(8). In this case the appliance will keep heating until reaching the temperature set.
2 Power button
6 Infrared receiver
8 + and – key
12 WEEK/TIME button
16 TEM button
), heating 1000W ( ), heating 2000W (
MANUAL MODE
TIMER 24H
or
. After the time, the heater will stop.
TEMPERATURE SETTING
3 Housing
7 On the back: ventilation slots
9 24H button
13 SET button
and
).
or
).
4 ON/OFF button
10 MODE button
14 AUTO button
are on).
).
).
14
Publicité
