Publicité
Instructions
• The installation of EZVIZ Smart Fingerprint Lock (hereinafter referred as to "lock") impacts its normal operation
and service life. It is recommended to let professionals install, and drill hole for lock set in accordance with hole
templet in appendix.
• It is recommended to remove the lock if your house is under decoration, and reinstall it after decoration in case
of lock damage and service life reduction.
• Please note that disinfectant may cause damage to the lock body.
• Once initialized completed, the lock will clear all user information. After lock installation and configuration, please
add fingerprint, Password or card as needed.
• When battery voltage is low after using for a while, low voltage alarm alerts. Replace battery timely and pay
attention to positive and negative poles.
• If you leave home or do not use lock for a long time, keep mechanical key with you, and do not leave it indoors.
You should take battery out to ensure lock service life.
• For users with flat or thin fingerprint, it is recommended to use thumb to register fingerprint for inceasing success
rate, and register more than one fingerprint with the same user.
• The lock accommodates up to 50 fingerprints, 50 Passwords and 50 cards.
Liste d'emballage
Panneau avant (×1)
Panneau arrière (×1)
1
Passerelle de base (×1)
Corps de serrure (×1)
Publicité
