Westfalia 92 85 13 Mode D'emploi page 29

Intended Use
 The compressed air gravity paint spray gun is
suitable for application of adhesive substrates and
primers and top coats on metal and wood and for
general coating work. Note that abrasive, acid and
petrol-containing materials must not be processed.
 The intended use also includes an operation
following the operating instructions.
 Any use beyond these parameters (different
media, applying force) or any changes (reconstruc-
tion, no original accessory) can lead to serious
risks and is regarded as use that is contrary to the
intended purpose. The operator is liable for any
damage caused by improper use.
Before first Use
Unpack the air spray gun and the accessory and check all parts for any
damage in transit. Dispose of packaging materials or store it out of reach
of children. There is risk of suffocation!
Preparing the Surface to be painted
The object to be painted, or the surface, etc. has to be clean, dry and free
of grease and dust. Metal surfaces must be stainless. Since the fine
sprayed paint is dispersed in a very thin layer on the surface, roughness
would have a negative effect on the paint result.
Viscosity Testing
Viscosity is the flow rate of a material. Measure the viscosity with a
viscosity cup (not included) as follows:
1. Thin the paint according to the manufacturer's recommendation. Start
with less thinner so you still can and add some thinner later.
2. Mix the paint thoroughly. Pour the paint into the viscosity cup or dip the
cup to the edge into the paint.
All manuals and user guides at all-guides.com
1) Gravity Spray Gun
25