Brandt BFD7611EW Manuel D'instructions page 33

How to reverse the door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on
something solid so that it will not slip during the door reversing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• lt' s better that 2 people handle the unit during assembly.
1. Unscrew top hinge cove and then unscrew the top hinge.
Then lift upper door and place it on a soft pad to avoid scratch and damage.
2. Remove the pin with a screwdriver and flip the hinge bracket. Then refit the
pin to hinge bracket.
3. Remove the top left screw cover.
4. Unscrew middle hinge.
5. Move hinge hole cover in lower door to another side. Then lift lower door and
place it on a soft pad to avoid scratch.
6. Move the hinge hole covers from left side to right side.