Ariston BCH CD1 120 ARI-EU Notice Technique D'installation Et Guide D'utilisation page 22

Technical Installation Instructions and User Guide
GENERAL SAFETY STANDARDS
Legend.of.symbols:
Ignoring.the.warning.may.pose.a.risk.of.fatal.injury.to.persons.in.
some.circumstances.
Ignoring.the.warning.pay.pose.a.risk.of.serious.damage.in.some.
circumstances.to.objects,.plants.or.animals.
************
1 - Avoid carrying out any operation that requires the unit
to be opened.
Fulguration. can. occur. through. contact. with. live. components..
Burn.injuries.from.hot.components.or.injuries.caused.by.parts.
that.stick.out.or.by.sharp.edges.
2 - Avoid placing items on the unit.
GB Injuries.can.be.caused.by.the.item.falling.because.of.vibrations.
Damage.may.be.caused.to.the.unit.or.items.below.it.by.items.
that.fall.because.of.the.vibrations.
3 - Do not climb on the unit.
Injury.can.be.caused.by.the.unit.falling.over.
Damage.may.be.caused.to.the.unit.or.items.below.it.by.the.unit.
coming.loose.from.its.support.
4 - Avoid climbing on chairs, stepladders, ladders or unstable
items to clean the unit.
Injury.can.be.caused.by.falling.from.a.height.or.by.cuts.(folding.
ladder).
5 - Use devices and manual tools that are intended for it
(be sure that the tool is not worn out and that the handle is
well attached), use them properly and take the precautions
necessary to prevent them falling, and be sure to put them
away after use.
Personal.injury.can.be.caused.by.projected.shards.or.fragments,.
inhaling.dust,.being.hit,.or.cuts,.pricks.or.abrasions.
The.unit.may.be.damaged.by.nearby.objects,.projected.shards,.
blows.or.cuts.
6 – Use the correct electrical tools (in particular, make sure
that the cable and the supply socket are in good condition
and that rotating or alternating parts are correctly atta-
ched), use them in the correct way, avoid obstruction by lea-
ving the supply cable visible, attach them securely so that
they do not fall from a height, remove them and put them
away after use.
Personal.injury.can.be.caused.by.projected.shards.or.fragments,.
inhaling.dust,.being.hit,.or.cuts,.pricks.or.abrasions.
The.unit.may.be.damaged.by.nearby.objects,.shards.being.pro-
jected,.blows.or.cuts.
7 - Make sure that portable ladders are stable, strong enou-
gh, that their steps are in good condition and not slippery,
and there is someone monitoring them to make sure that
they are not moved when there is somebody on them.
Injury.can.be.caused.by.falling.from.a.height.or.by.cuts.(folding.
ladder).
8 - Make sure that extending ladders are stable, strong
enough, that their steps are in good condition and not slip-
pery, that they have support bars the length of the ramp and
on the platform.
Injury.can.be.caused.by.falling.from.a.height.
9 - Be sure that when work is carried out at a height (over
2 metres) that support bars have been placed around the
working area, or that individual safety harnesses are used to
prevent the risk of falling; in case a fall does happen, make
sure that there are no dangerous obstacles in the way and
that the landing is softened by a soft or pliable surface.
Injury.can.be.caused.by.falling.from.a.height.
10 - Make sure that the conditions of the working area are
safe and healthy in terms of lighting, air flow, structural
soundness and emergency exits.
Personal.injury.can.be.caused.by.blows,.tripping.and.wounds.
11 - While work is being carried out, safety garments and
equipment should be used.
Personal.injury.can.be.caused.by.electrocution,.projected.shards.
or.fragments,.inhaling.dust,.being.hit,.or.cuts,.pricks,.abrasions,.
noise.or.vibrations.
18
12 - Internal operations must be performed with the grea-
test care, avoiding any rough contact with sharp points.
Personal.injury.can.be.caused.by.cuts,.pricks.and.abrasions.
13 - Do not use insecticides, solvents or harsh cleaning pro-
ducts for unit maintenance.
Painted.or.plastic.parts.can.be.damaged.
14 - Do not use the unit for anything other than normal do-
mestic use.
The.unit.may.be.damaged.by.operation.overload.
There.may.be.damage.to.objects.handled.in.an.improper.way.
15 - Do not allow children or inexperienced persons to use
the unit.
Damage.to.the.unit.may.be.caused.by.improper.use.
Make.sure.the.electrical.installation.conforms.to.standard.NFC.
15-100.and.industry.best.practice.
Refer.to.the.optional.electrics.kit's.installation.instructions.
16 - Protect the unit and the areas adjacent to the work area
using suitable materials.
The. unit. or. nearby. objects. may. be. damaged. by. shards. being.
projected.or.sharp.implements.
17 - Move the unit using adequate protective measures and
the greatest care.
Damage. can. be. caused. to. the. device. or. nearby. objects. from.
blows,.cuts.or.crushing.
18 - Make sure that materials and equipment are kept to
make unit maintenance easier and safer, avoid piling ob-
jects that can fall over.
Damage. can. be. caused. to. the. device. or. nearby. objects. from.
blows,.cuts.or.crushing.
19 - Restore the safety and control procedures that indicate
the need for operations on the unit, and make sure that they
are being carried out correctly before it is put back in ser-
vice.
Damage.or.harm.to.the.unit.can.be.caused.by.it.operating.wi-
thout.controls.in.place.