Quax HAVANA 54 01 35PXL-C Serie Manuel page 46

Les langues disponibles

HAVANA

Quax

First dreams

First steps

5. Assembling the bench

Needed parts : the leg frame AS from step 4.1, both end panels EB1 (now left and right), one side EB2, one

longeron EB4 and the slatted bottom EB3

Step 1 : Use the longeron EB4, two wooden dowels B and four eccentrics I

Push two eccentrics (I) in the provided holes at the innerside of the longeron (EB4). Push two wooden do-

wels (B) in the provided holes at the ends of the longeron.

Step 2 : Use the assembled part AB4 of step 1, both head panels EB1, the side (AB1) EB2, four bolts C

and two connectors J

Tighten a connector (J) in the provided hole at the inner bottom of the end sides (EB1). Push the side

(AB1) with their wooden dowels into the drillings of the head panels (EB1). Push the longeron (AB4) with its

wooden dowels into the drillings and over the connectors of the head panels (EB1). Tighten the eccentrics.

Push the bolts (C) in the drillings of the sides and tighten them in the head panels.

54 01 35PXLxx-C

Omvormbaar bed 140x70 cm

Konvertierbar Bett 140x70 cm

Lit convertible 140x70 cm

Convertible bed 140x70 cm