Jeep Phoenix Fat Manuel D'utilisation page 12

5. Assembly
Carefully remove the bike from the packaging* and remove the protective material taking care not to damage the relevant
aesthetic parts or force the cables and pre-assembled components.
*The bike must be removed from the packaging by two adults to ensure that it is not damaged and avoid the risk of injury
and/or crushing.
Positioning the handlebar stem
After having checked the correct orientation of the front wheel (confirmed by the position of the brake disk on the left side of
the front wheel) lift the handlebar stem to the vertical position.
Tighten the handlebar stem using the locking device indicated by letter A.
11