Peaq PTV552403 Guide D'utilisation page 31

Chapter 4 & 5
• S elect Digital & Analogue, Digital or
Analogue, then press OK/► to start the
automatic search, which relates to all DVB-T
digital and/or analogue channels.
Cable.
- Select
• P ress ▲/▼ to select Channel install, and
press OK/► to enter.
• S elect Automatic search, then press OK/► to
display Automatic search.
• P ress OK to skip the country selection and
enter the next step. Or use ◄/► to reselect
your country, then press OK to enter.
• - S elect Digital & Analogue, then press OK/►
to enter. Select your scan mode if available
and configure proper cable information in the
same way as in Initial setup. Select Scan and
press OK/► to start your automatic search
relating to all DVB-C digital and analogue
channels.
- Select Digital, then follow the same process
as above to start your automatic search
relating to all DVB-C digital channels.
- Select Analogue, then press OK/► to start
your automatic search relating to all analogue
channels.
Satellite.
- Select
• P ress ▲/▼ to select Satellite setup, and press
OK/► to enter.
• P ress ▲/▼ to select a proper satellite or add
new satellites if needed, then press OK to enter
and configure the correct information relating
to satellite and antenna.
• S elect Setup > Channel install > Automatic
search, then press OK/► to enter.
- Select Country, and use ◄/► to reselect
your desired country, if necessary.
- Select Satellite tuning, press OK/► to display
Automatic search. Configure the proper
information. Select Scan, and press OK/► to
start initial setup relating to all satellite channels.
4. The search may take a few minutes. During the
process, you can press MENU to abort halfway.
5. Once the automatic search ends, press MENU to
return to the previous step or press OK to restart
your channel search.
6. After the automatic search, channels are arranged
in a preset order. You can skip channels, modify
the preset order or rename channels.
Using your TV
Accessing channels
Using the alphanumeric buttons: press the
corresponding alphanumeric buttons to access the
channels.
Using the PR+/- or P+/- buttons: scroll through the
channels.
Using your TV & Using more of your TV
Watching connected devices
Repeatedly press SOURCE on the remote control
or OK on the TV set to toggle between TV and other
input sources. To resume TV viewing, press
numeric button to enter the channel, while P+/- will
cycle through all TV channels and other input sources.
Note: Not all models have OK button on the set.
Volume
Volume control: use the VOL+/- or VOL◄/►
buttons on the TV set or V+/- buttons on the remote
control to increase or decrease the volume.
Sound mute: press the
mute the sound. Press this button again or the V+
button to restore it.
Using TV menu
s
1. Press MENU to display the main menu. (Refer to
Figure 3.)
2. Press ▲/▼/◄/►to select the desired item, then
press OK to open the corresponding submenu.
3. In submenus, use ▲/▼ to select menu options,
use ◄/► to set functions or change values. Use
OK to activate a setting. Use OK/► to open the
corresponding submenu.
4. Press MENU to return to the previous menu.
5. Press EXIT to close the menu.
Note: Some options may not be available for
certain signal sources.
Selecting menu language
You can choose your preferred menu language
following the instructions below.
1. Press MENU to display the main menu.
2. Press ▲/▼/◄/►to select Setup, then press OK
to enter.
3. Select Language and press OK/► to enter.
4. Select Menu language and press ◄/► to select
your desired language to display the menus.
5. Press EXIT to close the menu.
Using more of your TV
Setting up your favourite channels
You can create a list of your favourite TV channels.
1. Press LIST.
2. Press the yellow button to enter Channel list
selection. Press ▲/▼ to select the favourite list
and press OK to enter.
3. Press the blue button to start editing your
favourite list. Press ▲/▼ to scroll through the
channel list and press OK to select or deselect it.
4. Repeat this procedure to setup other favourite
channels.
5. Press LIST/EXIT to exit.
EN 9
any
button to temporarily