Publicité
Les langues disponibles
Les langues disponibles
EN
28
Freestanding installation
•
The free-standing fireplace is fully assembled and no further assembly is
required.
•
Make sure that the fireplace has sufficient stability. In addition, the
fireplace must stand absolute straight. Measure this with a spirit level.
Otherwise, ethanol may leak.
•
Place the fireplace on a heat-resistant and fireproof surface.
•
Place the bioethanol burner in the fireplace.
Notes on installation
•
The ethanol fireplace consumes oxygen from the air of the room in which
it is operated. The rooms should be well ventilated with sufficient oxygen
and fresh air (i.e. slightly open windows if the room is not ventilated).
•
It is not recommended to use more than one fireplace at a time in one
room.
Note: Never leave an open fire unattended at any time!
•
The fireplace must not be used in the immediate vicinity of window
coverings, curtains or other freely hanging materials or fabrics. To ensure
that your window coverings cannot touch the device, keep a minimum
clearance of 1.5 m. Take into account that light fabrics could be blown
towards the fireplace by a gust of wind.
•
The use of "retention loops" for curtains or curtains is strongly
recommended.
Publicité
