Publicité
Les langues disponibles
Les langues disponibles
Connecting a Bluetooth device for the first time
Preparation:
• Connect the supplied USB Bluetooth Adapter (KS-UBT1) to one of the USB input terminals of the unit.
• Operate the device to turn on its Bluetooth function.
1
2
KS-UBT1
or
You can perform the following operations from
the <SET UP> menu.
• Pairing and delete pairing
• Connect and disconnect a registered Bluetooth device
(Phone/Audio)
=
[Turn]
<Bluetooth>
the following operations.
14
USB cable from the rear
of the unit
[Press]
=
<Device>
Perform
Turn on the power.
Connect the USB Bluetooth Adapter,
KS-UBT1.
• Only one USB Bluetooth Adapter can be
detected at a time.
Pairing and PIN code
When you connect a Bluetooth device to the unit
for the first time, make pairing between the unit
and the device. Pairing allows Bluetooth devices to
communicate with each other.
To make pairing, you may need to enter the PIN
(Personal Identification Number) code of your Bluetooth
device you want to connect.
• Once the connection is established, it is registered in
the unit even if you reset the unit. Up to five devices
can be registered in total.
• Only one device for Bluetooth phone and one for
Bluetooth audio can be connected at a time.
Publicité
