Publicité
Les langues disponibles
Les langues disponibles
English
6. Service parts list
CAUTION
Repair, modifi cation and inspection of metabo HPT
Power Tools must be carried out by a metabo HPT
Authorized Service Center.
This Parts List will be helpful if presented
with the tool to the metabo HPT Authorized
Service Center when requesting repair or other
maintenance.
In the operation and maintenance of power tools,
the safety regulations and standards prescribed
in each country must be observed.
WARNING
Never use any accessories other than those mentioned below.
The use of any accessories other than those mentionded below or attachments not intended for use
such as cup wheel, cut-off wheel or saw blade is dangerous and may cause personal injury or property
damage.
NOTE
Accessories are subject to change without any obligation on the part of the metabo HPT.
STANDARD ACCESSORIES
○ Wrench (Code No. 937913Z) ...................................1
○ Side Handle (Code No. 322411) ...............................1
OPTIONAL ACCESSORIES...sold
separately
○ Depressed center wheel (10pcs. per package)
7" (180 mm) external dia. × 1/4" (6 mm) thickness ×
7/8" (22.23 mm) hole dia.
9" (230 mm) external dia. × 1/4" (6 mm) thickness ×
7/8" (22.23 mm) hole dia.
NOTE
Specifi cations are subject to change without any
obligation on the part of the metabo HPT.
14
MODIFICATIONS
ACCESSORIES
(Code No. 701070)
(Code No. 701090)
metabo HPT Power Tools are constantly being
improved and modifi ed to incorporate the latest
technological advancements.
Accordingly, some parts may be changed without
prior notice.
Publicité
