PEAKnx Controlmini Notice Abrégée page 17

Troubleshooting
5. Optimizing microphone volume
− Move the slider to the second line from the right.
6. Testing configuration
− Start the configuration test.
7. Finishing Audio Assistant
− Close the audio assistant and have fun with your Controlmini / Control 12 intercom!
Troubleshooting
Problem
After a few seconds of good intelligibility on
the door unit, the person on the PEAKnx Pa-
nel is suddenly perceived quiet and barely
audible or cut off and hard to hear.
At the door unit, the person at the PEAKnx
Panel is perceived at the correct volume but
with noise in the background.
At the door unit, the person using the
PEAKnx Panel is perceived too quiet.
Solution
Microphone is amplified too much, see
point 4 Adjusting the microphone volume.
Reduce microphone volume slightly or
reduce microphone level slightly (slider to
the left)
The wizard amplifies the microphone of
the PEAKnx Panel too much, see point 5
Optimizing microphone volume. Reduce the
microphone volume (slider to the left)
The microphone is not amplified enough,
see point 4 Adjusting the microphone volu-
me. Increase the microphone volume (slider
to the right)
17