senya SYBF-CJ018N Notice D'utilisation page 30

VI- CLEANING AND MAINTENANCE
Always ensure that the juicer is turned off and the power cord is unplugged before cleaning.
1. Immediately after each use, use the cleaning brush to thoroughly clean the fine holes
of the filter. If the holes are clogged, soak the filter in warm water with 10% lemon
juice to loosen the blocked holes.
2. If the filter cannot be cleaned immediately after use, soak it in hot soapy water
immediately after juicing. If the pulp residue dries on the filter, it can clog the mesh
holes, thus reducing the efficiency of the juicer. Do not soak the filter in bleach.
3. Wash the detachable parts in warm soapy water with the cleaning brush or a soft
cloth. Rinse and dry them thoroughly.
4. Wipe the base of the motor with a soft, damp cloth and dry it thoroughly. Do not use
scouring pads or abrasive cleaners when cleaning the base of the product as they
may scratch or damage the surface.
5. Wipe off any excess food particles on the device
6. All non-electrical parts can be washed in a dishwasher.
7. When you are not using the product, store your device and accessories in a dry and
safe place.
VII- TREATMET
ELECTRONIC APPLIANCES AT THE END OF LIFE
Application in the countries belonged to the European Union and in other
European countries which have a selective collect system. This symbol on the
product or on its packaging indicates that this product shall not be treated as
household waste. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. The recycling of materials will help to conserve natural resources.
For more detailed information about recycling of this product, please contact your local city
office or your household waste disposal service. The packaging material is recyclable.
Eliminate the packaging in an environmentally friendly way and make it available to the
recycling collection service.
OF THE
30
ELECTRIC AND