Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
6. Once the set time has expired, a sound will be emitted and the device will
automatically stop the heat supply.
7. If you would like to stop the baking process prematurely, turn the timer to the 0
position to switch off the device.
8. Once the baking process is complete, pull the plug out of the socket.
9. Open the glass door and carefully take out the baking sheet or the grate. Always
use potholders or kitchen gloves to do so. Place the baking sheet/grate on a heat-
resistant base. The scope of delivery contains a baking sheet grip which facilitates
the removal of the baking sheet or grate.
10. Let the oven cool off. Clean it and the accessories used afterwards (see chapter
"Cleaning"). Do not allow any leftover food to dry on the device.
Baking with the pizza stone
1. Open the glass door and slide the grate (9) or the baking sheet (8) into the bottom,
middle or top track as needed.
2. Place the food on the pizza stone and put it on the baking sheet/grate in the oven.
Close the oven glass door.
3. Switch the top heat (–) and/or bottom and top heat (=) on (4).
4. Set the temperature control (2) to the desired temperature. Turn it clockwise for this
purpose.
5. To start baking, set the desired time with the timer (3) (no more than 60 minutes).
The POWER control light (5) will be illuminated after setting the timer.
If the timer is set 0, the oven will not switch on.
6. Once the set time has expired, a sound will be emitted and the device will
automatically stop the heat supply.
7. If you would like to stop the baking process prematurely, turn the timer to the 0
position to switch off the device.
8. Once the baking process is complete, pull the plug out of the socket.
9. Open the door and carefully remove the pizza stone.
Attention! Burn hazard attributed to hot pizza stone! Never touch the hot
pizza stone with bare hands after removing it from the oven. Wear kitchen
gloves instead!
10. Let the oven, the baking sheet or grate and pizza stone cool off. Then clean all parts
(see chapter "Cleaning"). Do not allow any leftover food to dry on the device.

Cleaning

ATTENTION!
Burn hazard associated with hot device parts! Let the device cool off each time
before you clean it.
Risk to life due to electrical shock! Prior to each cleaning, pull the mains plug out
of the socket. Never submerge the device, the mains cord, and the plug in water.
Never place the device in the dishwasher.
18

Publicité

Table des Matières
loading

Table des Matières