Sofamel SYNCRO Mode D'emploi page 20

5. Instructions:
Presence of voltage in TX only
When the TX detector is placed on a live phase, it will
flash red (6).
Phase concordance
When the TX detector is on a live phase, the RX detector
will flash green (7) if it is placed on a conductor with
the same phase.
Phase disconcordance
When the TX detector is on a live phase, the RX detector
will flash red and produce an intermittent acoustic
signal (6) if it is placed on a conductor with another
phase.
MAINTENANCE
Keep the absence of voltage detector clean.
Use the case supplied with the device during transport
and storage.
Avoid any type of impact: if the device is dropped, breaks
or any anomalies are detected, contact SOFAMEL, S.L.
to arrange for it to be checked, repaired or calibrated.
Even if kept in storage, the tester must be checked and
calibrated by the manufacturer after a maximum period of
6 years.
20